We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

What Is the Size of the Square on a Basketball Backboard? Official Dimensions

Find the size of the square on a basketball backboard: 24 by 18 inches for NBA and college glass, and how it changes for home and youth hoops.

Updated November 2026

The size of the square on a basketball backboard is 24 inches wide by 18 inches tall for the standard rectangular target area. That rectangle is painted or molded onto the glass, centered above the rim, and it sits 12 inches above the rim’s top surface. Most home and youth backboards follow this same measurement, though some portable systems use a slightly different design.

Why the Square Is 24 by 18 Inches

The 24-by-18-inch target is set by the official rules of the game. Shooters and coaches use it as a visual aim point, which is why it appears on professional, collegiate and most high school backboards. The square is measured from the inside edges of its outline, so the painted border itself is not counted in the dimension. Its bottom edge sits 12 inches above the rim, which gives a consistent launch zone for bank shots off the glass.

Shopping for one? See our guide: 6 Best Full Size Basketball Backboard Options for Home Use (2026).

The backboard itself is larger. A standard tempered glass or acrylic board measures 72 inches wide and 42 inches tall, and the square is positioned at the center of that surface. Keep this in mind when you compare a board to the official target, because a backboard that looks right at a glance may have a square that is smaller or placed differently.

Factors That Change the Measurement

Not every hoop follows the official specification. Several factors can change the square’s size or placement:

  • Level of play. Youth systems often use smaller boards and may omit the square or reduce its size to match a lower rim height.
  • Portable versus in-ground. Many portable units use a 44-inch or 54-inch board with a proportionally sized square, and some use a board without a painted square at all.
  • Manufacturer design. Brands may mold the target into the glass or print it on a decal. Decal squares can shift slightly during installation, so measure from the rim up before you assume the placement is correct.
  • Backboard material. Glass, acrylic and polycarbonate boards all use the same official target dimensions, but the surface finish can make the outline look different.

How to Check and Mark Your Own Backboard

If your backboard is missing its square or the existing one looks off, you can measure and mark it yourself. Owners often report that a careful measurement takes about 20 minutes. Work from the rim outward so the target stays aligned with the hoop.

  1. Confirm the rim is level and mounted at 10 feet from the floor.
  2. Measure 12 inches straight up from the top of the rim and mark a horizontal line on the backboard. This is the bottom edge of the square.
  3. From the center point of the rim, measure 12 inches left and right on that line to find the sides.
  4. Measure 18 inches up from the bottom edge along each side to set the top corners.
  5. Connect the corners with a straight edge and check that both diagonals are equal, which confirms a true rectangle.
  6. Apply a removable outline or paint designed for glass or acrylic, and let it cure fully before play.

Tips that help:

  • Use a level and a tape measure rather than eyeballing the placement.
  • Test the diagonals before you commit to paint, since a small error here shows up clearly on the backboard.
  • If you are unsure about mounting or structural work on a glass board, consult a professional installer.

What We’d Use

For a clean, removable target on a glass or acrylic board, a vinyl backboard square decal is a practical choice that avoids paint. View on Amazon

If you need a complete replacement board with the target already molded in, a standard 72-inch backboard is the most direct option. View on Amazon

FAQ

Is the square the same size on every basketball backboard?

No. Official professional and collegiate boards use 24 by 18 inches, but youth, portable and some residential systems can vary.

Does the square count as part of the backboard size?

No. The 24-by-18-inch measurement refers to the inside of the target outline, while the full board is typically 72 by 42 inches.

How high is the bottom of the square above the rim?

The bottom edge of the official square sits 12 inches above the top of the rim, which is the standard reference point for placing it.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our basketball skills & drills guides, checking product details against manufacturer specifications and owner feedback.

About the author

Emily Parker
Emily Parker

Emily Parker writes reviews and buying guides for Pressure Basketball.